Pediatric vision testing is normally recommended with the intention of detecting disorders early enough. The common disorders include amblyopia, misaligned eyes (strabismus) and refractive errors that may call for eye glasses. The most commonly used approaches include community settings such as schools, health fairs, or in medical institutions. Vision screener is the most important medical device that has made this form of testing so cheaply and easily accessible.
This important device is supported by a list of impressive testimonials resulting from validated studies which are qualified by positive reviews from the general medical profession and the public. It is so easy to use hence preferred by pediatricians, Lions club and school nurses. Given that the only necessary compliance is a short fixation of camera, this form of screening works for all children. The device works by producing a specially designed sound targeted to provoke the fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This means that even non-medical staff can actually perform the screening. The person to perform screening starts by pulling the camera trigger to start; this is followed by a sound that is meant to attract attention. The image of both eyes is captured on a white triangle on the screen that then allows for performing the necessary measurements. The recommended screening distance is one meter (3.3 feet) from the camera. The tolerance level is +-5 centimeters or +-2 inches. The results are then displayed on the screen in a matter of seconds.
In order to come up with results, the measurements performed include determination of refraction size, pupil size and the corneal reflexes. These are then compared to referral criteria that are age based. For anisometropia, refractions of both eyes are compared while corneal irregularity is determined for astigmatism.
In order to diagnose myopia, the nearsightedness is checked and farsightedness checked for hyperopia. The other checks that are done include comparison of pupil sizes for both eyes for anisocoria and determination of symmetric eye alignment for corneal reflexes. All these happen automatically in seconds hence the immediate results displayed on the screen.
A PASS displayed on the screen implies that all readings are within the recommended limit meaning that none of the conditions has been detected. In case of one or more of measurements or not within the limit, the result displayed is a REFER. Either a REFER or PASS is displayed on the screen as soon as the measurement is complete.
The results can be saved and printed in different formats thanks to an internal database. The database makes it possible to review the previous records in an organized or chronological order. In addition to this, the device is also cheaply available hence saves a lot of money and time that could be wasted in having to visit an optician.
This important device is supported by a list of impressive testimonials resulting from validated studies which are qualified by positive reviews from the general medical profession and the public. It is so easy to use hence preferred by pediatricians, Lions club and school nurses. Given that the only necessary compliance is a short fixation of camera, this form of screening works for all children. The device works by producing a specially designed sound targeted to provoke the fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This means that even non-medical staff can actually perform the screening. The person to perform screening starts by pulling the camera trigger to start; this is followed by a sound that is meant to attract attention. The image of both eyes is captured on a white triangle on the screen that then allows for performing the necessary measurements. The recommended screening distance is one meter (3.3 feet) from the camera. The tolerance level is +-5 centimeters or +-2 inches. The results are then displayed on the screen in a matter of seconds.
In order to come up with results, the measurements performed include determination of refraction size, pupil size and the corneal reflexes. These are then compared to referral criteria that are age based. For anisometropia, refractions of both eyes are compared while corneal irregularity is determined for astigmatism.
In order to diagnose myopia, the nearsightedness is checked and farsightedness checked for hyperopia. The other checks that are done include comparison of pupil sizes for both eyes for anisocoria and determination of symmetric eye alignment for corneal reflexes. All these happen automatically in seconds hence the immediate results displayed on the screen.
A PASS displayed on the screen implies that all readings are within the recommended limit meaning that none of the conditions has been detected. In case of one or more of measurements or not within the limit, the result displayed is a REFER. Either a REFER or PASS is displayed on the screen as soon as the measurement is complete.
The results can be saved and printed in different formats thanks to an internal database. The database makes it possible to review the previous records in an organized or chronological order. In addition to this, the device is also cheaply available hence saves a lot of money and time that could be wasted in having to visit an optician.
No comments:
Post a Comment